Rigging & Slinging Operator Safety Training

1. Regulations & Compliance

• Follows OSHA 1910.184 (Slings), OSHA 1926.1400 (Cranes), and ANSI/ASME B30.9 (Slings Safety).

• Operators must be trained and certified before engaging in rigging and slinging activities.

2. Equipment Inspection

• Slings: Inspect for wear, cuts, rust, and corrosion, and ensure no knots or abrasions.

• Rigging Hardware: Check shackles, hooks, and other rigging components for deformation or damage.

• Hooks and Hoists: Ensure they are functional, secure, and free from defects.

3. Safe Rigging Practices

• Load Distribution: Ensure the load is balanced and evenly distributed to prevent shifting.

• Correct Slinging: Choose the right type of sling (wire rope, synthetic, chain) based on the load's characteristics.

• Secure the Load: Ensure all hooks, shackles, and slings are properly connected to avoid slippage.

• Tag Lines: Use tag lines to control loads, especially when lifting tall or unbalanced objects.

4. Common Hazards & Prevention

• Dropped Loads: Ensure slings and rigging components are rated for the load and always double-check connections.

• Entanglement: Never stand under a suspended load, and avoid pinch points.

• Slips & Falls: Wear proper footwear and ensure a clear pathway while moving loads.

• Tensioning Hazards: Avoid sudden jerks or excessive tension that can cause rigging equipment to fail.

5. Emergency Procedures

• Load Failures: Stop the lift immediately, clear the area, and report the incident.

• Injuries: Follow first aid procedures and ensure injured workers receive immediate medical attention.

• Evacuation: Familiarize yourself with evacuation routes and emergency protocols.

6. Certification & Refresher Training

• Initial Certification: Includes classroom and hands-on training in load identification, rigging techniques, and safety measures.

• Refresher Training: Recommended every 2-3 years or after a significant safety incident to maintain up-to-date knowledge.